manualshive.com logo in svg

Duratech 4426, Инструкция по эксплуатации и справочник по запасным частям

Поделиться
Скачать
Duratech 4426 Скачать руководство пользователя страница 19

11

1 0 7   D R I L L

O P E R A T I N G   I N S T R U C T I O N S

IMPORTANT WINCH SAFETY INFORMATION

•

The winch is built for multipurpose hauling and lifting operations.  It is not to be used as a hoist for
lifting, supporting or transporting people, or for loads over areas where people could be present.

•

Respect the winch.  High forces are created when using a winch, creating potential safety hazards.  It
should be operated and maintained in accordance with instructions.  Never allow children or anyone who
is not familiar with the operation of the winch to use it.  A winch accident could result in personal injury.

•

Check winch for proper operation on each use.  Do not use if damaged.  Seek immediate repairs.

•

Never exceed rated capacity.  Excess load may cause premature failure and could result in serious
personal injury.

•

Never apply load on winch with cable fully extended.  Keep at least three full turns of cable on the reel.

•

Secure load properly. When winching operation is complete, do not depend on winch to support load.

•

Operate with hand power only.  This winch should not be operated with a motor of any kind.  If the
winch cannot be cranked easily with one hand, it is probably overloaded.

FAILURE TO COMPLY WITH ANY OF THE ABOVE SAFETY INSTRUCTIONS OR
THOSE THAT FOLLOW WITHIN THIS MANUAL MAY RESULT IN SEVERE INJURY
OR DEATH.

THIS DRILL IS NOT TO BE USED FOR ANY PURPOSE OTHER THAN THAT FOR
WHICH IT IS INTENDED AS EXPLAINED IN THE OPERATOR’S MANUAL,
ADVERTISING MATERIALS AND OTHER PERTINENT WRITTEN MATERIAL
PREPARED BY DURATECH INDUSTRIES.

Содержание 4426

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды