Duran Electronica EUROSONDELCO, Руководство по установке

Страница: 17 / 96

X-maneuro-INS-v02
41
The different levels will be displayed:
Carbon Monoxide CO From 20 to 390 ppm.
Explosives EXP From 10 to 90% L.E.L.
Oxygen O
2
From 2 to 24%
Nitrogen Dioxide NO
2
From 2 to 19 ppm
Other toxic gase From 20 to 190 ppm
8.
Press FORWARD to select the wanted alarm level.
9.
Press ENTER to memorise.
The ventilation level 1st speed will be displayed “50ppm”.
10.
Press PROGRAMMING if you want to change it.
11.
Press FORWARD to select the wanted alarm level.
12.
Press ENTER to memorise.
The ventilation level 2nd speed will be displayed “100ppm”.
13. Press PROGRAMMING if you want to change it.
The different levels will be displayed:
Carbon Monoxide CO From 20 to 390 ppm.
Explosives EXP From 10 to 90% L.E.L.
Oxygen O
2
From 2 to 24%
Nitrogen Dioxide NO
2
From 2 to 19 ppm
Other toxic gases From 20 to 190 ppm
14.
Press FORWARD to select the wanted ventilation level.
15.
Press ENTER to memorise.
The ventilation input retard will be displayed “1 min”. This menu allows to program a retard from the moment
the ventilation condition is detected until the ventilation acts.
16. Press PROGRAMMING if you want to change it.
17. Press FORWARD to select the wanted one -from 0 to 4 min-.
18. Press ENTER to memorise.
The ventilation output retard will be displayed “2 min”. This menu allows to program a retard from the moment the
no ventilation condition is detected until it is disconnected.
19.
Press
PROGRAMMING
if you want to change it.
20.
Press FORWARD to select the wanted one -from 0 to 4 min-.
21.
Press ENTER to memorised.
If 2 groups were previously chosen, proceed in the same way with group 2.
To program the other parameters: system overhaul warning, reset of system overhaul warning, reset of system ovehaul,
acoustics inhibition, general reset, erasing events, detectors calibration, printing out parameters, exit the programming menu,
follow the steps described in point 5 regarding the spanish standard.
Engli
sh