18
IMPORTANT: USE HAND GLOVES TO PREVENT INJURY.
40
. Assemble the Column fitting (CFP) with all columns
(COLP) with (S1) screw.
Fig.1
Fig.2
Make sure the direction of
arrow (Fig. 1) and opening of
the Column (Fig. 2) as Shown
Note
COLP
CFP
1
2
CFP
41
. Fix two column fitting with columns to the base
bar (BSBP) with (S1) screws from inside.
Fig.1
Front
Back
S1
CFP
BSBP
42
. Place the Wall Panel (WP4A) on the base bar side
(BSBP). Line up the holes with base bar and top angle.
Fig.1
Fig.2
Front
Back
1. Secure the Panel at bottom with (S1) screws
to the base bar from out side.
2. Secure the Panel at top with (S1) screw
through the top angle to the Column (COLP)
2
1
WP4A
S1
S1
First fix the middle screws (top
or bottom) then go to the edges.
Tip
