Duralloy MULTIMIG 200 PFC MV, Руководство пользователя

Страница: 23 / 28

Welding Safety Instructions & Warnings
WARNING!
Protect yourself and others from possible serious injury or
death. Keep children away. Read the operating/Instruction
manual before installing, operating or servicing this
equipment. Have all installation, operation, maintenance,
and repair work performed by qualified people.
If an operator does not strictly observe all safety rules and take
precautionary actions, welding products and welding processes
can cause serious injury or death, or damage to other equipment
or property.
Safe practices have developed from past experience in the use
of welding and cutting. These practices must be learned through
study and training before using this equipment. Some of these
practices apply to equipment connected to power lines; other
practices apply to engine driven equipment. Anyone not having
extensive training in welding and cutting practices should not
attempt to weld.
Safe practices are outlined in the European Standard EN60974-1
entitled: Safety in welding and allied processes.
WARNING!
Only use safety equipment that has been approved by
an appropriate standards agency. Unapproved safety
equipment may not provide adequate protection. Eye and
breathing protection must be AS/NZS compliant for the
specific hazards in the work area.
DANGER!
Always wear AS/NZS compliant safety glasses and full
face shield fitted with appropriate filter shade number.
(Refer Filter Table in this safety section)
CAUTION
Heavy-duty work gloves, non-skid safety shoes and
hearing protection used for appropriate conditions will
reduce personal injuries.
CAUTION
Have the equipment serviced by a qualified repair person
using identical replacement parts. This will ensure that the
safety of the power tool is maintained.
www.duralloy.net.au | 1300 369 456
Personal Safety
CAUTION
Keep the work area well lit. Make sure there is adequate
space surrounding the work area. Always keep the work
area free of obstructions, grease, oil, trash, and other
debris. Do not use equipment in areas near flammable
chemicals, dust, and vapours. Do not use this product in a
damp or wet location.
1. Stay alert, watch what you are doing and use common sense
when operating equipment. Do not use a tool while you are
tired or under the influence of drugs, alcohol or medication. A
moment of distraction when operating equipment may result
in serious personal injury.
2. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
Arc Rays can Burn Eyes and Skin
DANGER!
Arc rays from the welding process produce intense heat
and strong ultraviolet rays that can burn eyes and skin.
1. Use a Welding Helmet or Welding Face Shield fitted with a
proper shade filter (refer AS 60974-1, AS/NZS 1337.1 and AS/
NZS 1338.1 Safety Standards) to protect your face and eyes
when welding or watching. (See Filter Table later in this
section)
2. Wear approved safety glasses. Side shields are
recommended.
3. Use protective screens or barriers to protect others from flash
and glare; warn others not to watch the arc.
4. Wear protective clothing made from durable, flame-resistant
material (wool and leather) and foot safety protection.
5. Never wear contact lenses while welding.
Noise Can Damage Hearing
CAUTION
Noise from some processes can damage hearing. Use AS/
NZS compliant ear plugs or ear muffs if the noise level is
high.
23
MULTIMIG 200 PFC MV
OWNER’S MANUAL