Duralloy 171 MULTIMIG, Руководство пользователя, Страница: 4 / 22

www.duralloy.net.au | 1300 369 456
4
171
& 191
MULTIMIG
OWNER’S MANUAL
MAIN PARAMETER
Note: The welding duty cycle is the percentage of actual continuous welding time that can occur in a ten minute cycle. For example:
15% at 200amps- this means the welder can weld continuously at 200 amps for 1.5 minutes and then the unit will need to be rested for
8.5 minutes.
The duty cycle can be affected by the environment in which the welder is used. In areas with temperatures exceeding 40 o C, the duty
cycle will be less than stated. In areas less than 40
o
C, higher duty cycles have been obtained
All tests on duty cycles have been carried out at 40 o C with a 50%. So in practical working conditions the duty cycles will be much
greater than those stated above.