Duralloy 171 MULTIMIG, Руководство пользователя, Страница: 10 / 22

www.duralloy.net.au | 1300 369 456
10
171
& 191
MULTIMIG
OWNER’S MANUAL
POSITION OF MIG TORCH
The angle of MIG torch to the weld has an effect on the width of the weld
The welding gun should be held at an angle to the weld joint. (See Secondary Adjustment Variables below) Hold the gun so that the
welding seam is viewed at all times. Always wear the welding helmet with proper filter lenses and use the proper safety equipment.
CAUTION
Do not pull the welding gun back when the arc is established. This will create excessive wire extension (stick-out) and make a very poor
weld.
The electrode wire is not energized until the gun trigger switch is depressed. The wire may therefore be placed on the seam or joint
prior to lowering the helmet.