Durafly P-51D OLD CROW, Инструкция по сборке и эксплуатации

Страница: 8 / 28

88
P-51D OLD CROW
5
ASSEMBLE THE PLANE
INSTALL THE CONTROL HORN
1. Attach the flap control horn on the servo
side of the main wing with the horn
towards the hinge line.
1.1
3. Secure the horn using the provided
screws from the backplate side.
NOTE: The longer screws for secure
the horns always located on the
leading side of the surface.
3
4. Make sure the screws firmly into the
backplate.
Note: Do not over tighten the screws,
but make sure they are tight enough.
4
1.1
Flaps
2
2. Secure the horn from the backplate
using the provided screws.
NOTE: No backplate used in this step or
it will stop the flap from fully retract.