Durafly P-51D OLD CROW, Инструкция по сборке и эксплуатации

Страница: 15 / 28

12
MAIN WING ASSEMBLY, SET-UP AND INSTALLATION
MOUNT THE MAIN WING
1. Seat wing to the wing bay by threading
the leads from the hole at the bottom of
the wing bay to the receiver hatch,
2. Slightly pull the leads from the receiver
hatch before fully fit the main wing into
place to avoid any tangling to prevent
the wing from fully mounting.
1
2
3. Check to make sure the main wing
before secure it into place using the
provided self tapping screws, two pieces
PWM 3*45 (A) to hold the wing front into
place. The PWM 3*50(B) pieces are
used to secure the rear side of the wing
into place.
A B
3