Durafly P-51D OLD CROW, Инструкция по сборке и эксплуатации

Страница: 19 / 28

16
FINAL ASSEMBLY AND SET-UP PROCEDURES
CHECK THE CONTROL THROWS
1. Adjust ATV/travel adjustment on your transmitter until you obtain the following control
surface travel. Do not adjust dual rates until you have correctly adjusted the total travel.
AILERONS: 16mm up and down (both ailerons), measured at the aileron inboard side.
ELEVATOR: 12mm up and down, measured at the counterbalance leading edge.
RUDDER: 12mm left and right, measured at the counterbalance leading edge.
FLAPS: Full 25mm
2. The dual rates and the Exponential setting for intermediate flyers of P -51 are based on
the ATV set in previous step.
2.3
2.4
High Rate
100% 20mm left/right
100% 16mm up/down
100% 16mm up/down
Rudder
Elevator
Aileron
25%
25%
30%
Expo
15%
20%
20%
Expo
75% 15mm left/right
63% 10mm up/down
69% 11mm up/down
Low Rate
2.1
Aileron Aileron
2.2
Elevator Elevator
Rubber Rubber Flap Flap