SETTING UP YOUR MODEL:
1.
With your receiver installed and servos plugged into their corresponding channels, connect the flight
battery to the ESC to power up the electronics. With the model now armed, ensure all servos are
centered and al control surfacees are level. If not, adjust by turning the control clevis’s by hand
accordingly until the control surfaces are level as shown.
2.
The Excalibur V2 handles exceptionally well in flight, and that's not down to a good design alone, but a
good pre-flight set-up as well. Before you fly your Excalibur V2, please follow the recommended settings
as shown below for optimum handling and performance.
Note:
For Safely reasons, it is advised that this is done with the prop removed from the model.
6