background image

-5-

the vapors from these products can create a white powdery residue within the burner box or on 

adjacent walls or furniture.
Do not operate this appliance where flammable liquids or vapors are used or stored, or in a dusty 

environment.
If water has entered the burner reservoir of the appliance, ensure that the water has been 

emptied from the appliance before use.  Water can dilute the duraflame illuma-fuel and affect the 

performance of the appliance.
Do not use the appliance if there is visible damage.  If you see damage, contact the store where 

purchased or Duraflame’s customer service.  Do not attempt to repair the appliance yourself.  Do 

not use your appliance if it has been modified in any way.
Turn off the appliance and let it cool before servicing or repairing it.
An open fire is always a potential hazard.  You must have a Class B fire extinguisher near the 

fireplace in case of fire.
Do not dismantle the burner.  Do not insert any other fuel canister into the burner.
This appliance must be operated using only authorized accessories and equipment.
Do not move the appliance while it is burning.  This could cause burning fuel to spill and result in 

injury or a fire.
Do not put anything into the flames of the appliance.  This could cause sooting and the creation of 

harmful combustion products.
Do not put your head over the burner while lighting it. Keep all body parts safely away from the 

device while igniting and while the appliance is in use.
Do not leave the appliance burning unattended.  Extinguish the flames before you leave the house, 

go to bed, or leave the room for an extended period of time.  Never leave children unattended near 

the appliance while it is in use.
Extinguish the flames by rotating the knob on the side – this will close the burner cover and 

extinguish the flames.  Do not attempt to blow out the flames.  Never use water to extinguish the 

flames.  This could cause an explosion. The cover will be extremely hot.  Do not obstruct the sliding 

cover of the snuffer device in any way as this could interfere with your ability to extinguish the flames.
Keep packing materials away from children, as they could be a choking or suffocation hazard.
In case of burns, seek treatment from your doctor or hospital.
Duraflame accepts no responsibility for any damage that might result if this appliance is improperly 

installed, incorrectly operated, used for purposes other than that for which it is intended, or if it is 

repaired by unqualified persons.

II. SETUP

CAUTION: Do not remove the metal data plate (rating plate) that is attached to the inside of the 

door of the appliance.  It contains important product information.

WARNING: Before installing this appliance in a solid-fuel-burning fireplace, the chimney flue 

and firebox must be cleaned of soot, creosote, ashes, and loose paint by a qualified chimney 

cleaner.  Creosote will ignite if highly heated.  Inspect the chimney flue for damage.  If 

damaged, operate the appliance with the flue damper closed.

Содержание illuma 64000



















Отзывы: