SAT-FINDER SF 4000 BT
4/11 25.07.2018
D U R A - S A T G m b H & C o . K G
2
Requirements
Please observe the following points, prior to operating the SAT-FINDER.
•
The SAT-FINDER is exclusively designed to measure satellite TV signals
•
The signal will not be looped through to the receiver
•
App support is currently available for Android and iOS devices
Required release: Android 4.3 / iOS 9.0
•
You can also calibrate all pre-set satellites without a smartphone or app
(pre-set satellites, see point 3.1)
•
Download the app to your smartphone.
This can be found in the Google Play Store or the Apple iTunes Store by the name “DUR-
line Finder”
•
You smartphone has to support Bluetooth Smart / Bluetooth Low Energy (BLE)
•
This app supports multiple languages. The language will be automatically set to the
system language of your smartphone
3
Assembly and connection of the SF 4000 BT
1.
Assemble your antenna on to a mast or wall bracket provided for this purpose.
2.
Just tighten the screws of the antenna, so that it can still be rotated.
3.
Connect a connection-cable from the “LNB”-output to the LNB input of your SAT-
FINDER.
4.
Now, connect the cable to your SAT receiver on the DC 5-18V output of the SAT-
FINDER (e.g., see connection example below).
This cable can also be connected to a multi-switch, an 18V-power supply (DC)
or an USB-Powerbank.
5.
If all cables are properly connected, switch on your power-supplying device.
NOTE:
The signal will not be looped through to the receiver
Connection example:
Содержание DUR-line SF 4000 BT
Страница 12: ......