manualshive.com logo in svg

Duplo DF-1200, Инструкция по эксплуатации

Поделиться
Скачать
Duplo DF-1200 Скачать руководство пользователя страница 81

4-5

Chapter 4 Cleaning the Unit

Keep in mind the following notes when using the air duster.

•  Use a non-flammable air duster. Read 

the cautions for use well, and be sure to 

keep the descriptions in mind.

• 

The sensors and metallic section are 

cooled by gas in the air duster, and may 

be temporarily condensed. Wait for 

about five minutes.

Paper sensor

Paper sensor

(Only for North America)

1 

Open the top cover.

Open or close the top cover

gently.

Hands or fingers may be caught in the

cover section.  Doing so may result in 

injury.

2 

Insert the nozzle of air duster into the 

hole shown in the figure to blow air.

Paper ejection inlet sensor upper, Paper ejection inlet sensor  

(upper and lower), Home sensor of Folding plate 1

1 

Remove the folding plate 1.

Attach the folding plate 1 holding with 

both hands.

2 

Open the top cover.

Open or close the top cover

gently.

Hands or fingers may be caught in the

cover section.  Doing so may result in 

injury.

Содержание DF-1200



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды