manualshive.com logo in svg

Duplo DF-1200, Инструкция по эксплуатации

Поделиться
Скачать
Duplo DF-1200 Скачать руководство пользователя страница 38

2-10

Chapter 2 Basic Operation

17

  Select the method of using the counter.

A4     +0.0/

A4     +0.0/

Ready

Ready

0

100

Count up

Count down

•  The counter can be used in two ways “Count 

Down” and “Count Up”.
Count up       : Press the clear key and set  

 

 

the counter to “0” to start  

 

 

operation.

Count down : Enter the number of sheets  

 

 

to be processed on the   

 

 

keypad to start operation.

•  Up to four digits (9999) can be displayed.
•  An icon will be displayed by pressing the start key.

Count up

When pressing the clear key, the buzzer sounds “pi”, and the count display will return to [0].
When pressing the start key without pressing the clear key, paper folding operation will restart and the 

number of sheets processed will be counted up.
The machine will stop operations when the count display shows [9999]. Press the clear key to return 

the count display to [0] and press the start key when processing paper folding continuously.

Count down

The machine will stop when the number of sheets set for processing is processed, and the count 

display will return to the number of sheets set for processing.
When pressing the clear key, the buzzer sounds “pi”, and the use of the counter will return to “Count 

up” instead of “Count down”.
The count display will return to [0].
When pressing the start key without pressing the clear key, paper folding operation will restart and the 

number of sheets processed will be counted down.

After that, the procedures vary depending on the use of the counter.
For counting down, refer to procedure 18.
For counting up, refer to procedure 19.

18

  Press the keypad to enter the number 

of sheets to be processed.

19

  Press the start key to start folding.

•  Press the stop key to interrupt or stop 

operation. Press the start key again to 

restart operation.

•  When paper stacked on the paper feed tray runs out, 

the machine will stop automatically, and [No Paper] 

will be displayed on the LCD display. When paper is 

stacked on the paper feed tray, the display of [No Paper] 

will disappear, and the machine will be in the stand-by 

state.

•  When double-feed or paper size error occurs during folding operation, the fed paper is processed 

and ejected, but the number of processed sheets will not be counted.

•  When paper jams at the paper ejection section, paper may be fed after detecting paper jam at the 

paper ejection section, but the number of sheets processed will not be counted.

Содержание DF-1200



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды