Duplo DC-616, Руководство по обслуживанию

Страница: 122 / 210

120
Chapter 6 1 Troubleshooting
S2-Y1540
(12) When “E07 Connect error” is displayed
step
cause/failed
area
check item if action
see
page
1
Main PCB/Drive
PCB
Check that the connection
between the main PCB
(CN6) and the drive PCB
(CN3) is correct.
YES Reconnect properly. -
NO Go to step 2. -
2
Main PCB/Drive
PCB
Check that the Drive PCB
works properly in HELP
Mode: 16.
YES Replace the main PCB. 97
NO Replace the Drive PCB. 97
(13) “E08 FPGA ERROR” is displayed
step
cause/failed
area
check item if action
see
page
1 Main PCB
Check that an error
message is displayed
even if the power is turned
on again.
YES Replace the main PCB Unit. 97
(14) When “BC READ ERROR” is displayed
step
cause/failed
area
check item if action
see
page
1 Document
Is the barcode printed on
the document?
YES Go to step 2. -
NO
Change the document to
the proper one.
-
2 Document Is the barcode bad printing?
YES Go to step 3. -
NO Print barcode again. -
3 Document
Is the barcode valid? (1 to
80)
YES Go to step 4. -
NO Print valid barcode. -
4 CCD
Attempt to read the test
sheet.
NG Replace the CCD unit. 68
-0
(HELP Mode : 16 → P.140)