: First select the program number, press
the screen appears C&S. You can now setup
the required cut size. When the cut size is
selected, make a cut and the cut position will be
auto stored in the memory.
: In AUTO mode, press
, it
will run (or skip)
over a certain cut size which is not used, and will
go to the next cut in memory.
:
Both keys can be used together, they are used
for making multiple cuts into more pieces (i.e.
business cards), or for two cuts trim (
“
－
” key
can be entered twice
).
: Insert a line of data.
1. Move the cursor to the right line you wish to
insert new cut, then press key. (The
flashing line will auto move down to the next,
the cursor is flashing at its place.)
2. Press the cursor, the cuts memory screen will appear, press
~ 13~
~14~
26.000
1 2
10.100
10.200
10.300
0.000
0.000
0.000
0.000
0.000
0.000
0.000
26.000
1 2
10.100
0.000
10.200
10.300
0.000
0.000
0.000
0.000
0.000
0.000
26.000
1 2
10.100
0.000
10.200
10.300
0.000
0.000
0.000
0.000
0.000
0.000
11.1
10.100
10.200
10.300
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
10.100
0.000
10.200
10.300
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
10.100
0.000
10.200
10.300
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
0.000
