~ 12 ~
While calibrating above screen appears, after finish the calibration it
beeps 3 times pi-pi-pi, and the following screen appears, you can
operate the new Mark VII.
New MARK VII allows for 500 programs with 79 cuts each. A
total of 39500cuts can be stored.
Instruction for Keys
~
:
To key in a size.
: Press and hold down the key, the backgauge
moves forward slowly, once the key is released
backgauge will stop.
:
Press and hold down the key, the backgauge
moves fast forward, once the key is released
backgauge will stop.
: Press and hold down the key, the backgauge
moves slowly to the rear. When release the
key backgauge stops.
: Press and hole down the key, the backgauge
moves fast to the rear. When release the key
backgauge stops.
:
Press and hold the key, the brake is released,
you can move the backgauge by turning the
micro adjustment by hand.
: Press as an emergency button, it will
beep once, machine will start again.
: Be sure it displays scissors icon on the screen,
then you can make cut. The scissors icon
won’t be appeared when backgauge is moving.
~ 11 ~
26.000
0 0
0.000
26.000
