5 | DOC-568_EN REV04
ORIGINAL INSTRUCTIONS
3. MODELS
NOTE
»
APPLICABLE TO ALL POWER UNITS: in order to avoid overheating, we
recommend 12in / 30cm clearance all around the power unit�
4. INSTALLATION
POWER UNIT
Fig. 1
Mounting bracket is the same for all units
The power unit must be installed in a ventilated area, easily accessible and away from any heat
source. It should also be close to an accessible electrical outlet.
1�
Determine the location of the power unit on the wall; we recommend that the power unit
be fastened at 60” / 1,5m from the ground in order for the dust canister to be readily
accessible; allow 12” / 30cm clearance on all sides of the power unit. When possible, it is
advisable to install the power unit on a concrete wall in order to minimize the vibrations;
2�
Gypsum wall:
• Prepare the wall by installing a plywood mounting board (not provided) 16” / 40cm high
by 3/4” / 2cm thick and wide enough to be screwed to at least 2 studs;
• Fasten the mounting bracket to the mounting board with the provided screws;
3�
Concrete wall:
• Drill the holes with a concrete drill bit;
• Insert the provided wall anchors into the drilled holes;
• install the mounting bracket with the provided screws into the anchors;
NOTE
»
You can still install a plywood mounting (16” / 40cm x 10” / 25cm x
3/4” / 2cm) board if desired;
»
You can use provided screws to fi x mounting board on the wall, but
cannot use them for installing the mounting bracket on the mounting
board because of their length� You need to use shorter screws (not
provided)�
IMPORTANT
Always use the right type of screws for the surface you are working with (wood,
concrete, metal…)
4�
Insert the power unit bracket into the mounting bracket (Fig. 1).
5�
Insert the PVC pipe into the air intake coupling;
DO NOT GLUE!
Machine washable
permanent fi lter
Aluminum canister
Disposable fi ltration
bag (optional)
Internal control
module
Air intake
Air outlet
Machine washable
permanent fi lter
Aluminum canister
Disposable fi ltration
bag (optional)
Internal control
module
Air intake
Air outlet
