GB
36
14. TROUBLE SHOOTING
PROBLEM
PROBABLE CAUSE
CORRECTIVE ACTION
Unit won’t start or starts but
will not run.
Incorrect starting procedures.
Incorrect carburetor mixture
adjustment setting.
Fouled sparking plug.
Empty fuel tank.
Primer bulb was not pressed
enough.
Follow instructions in the User
Manual.
Have carburetor adjusted by an
Authorized Service Centre.
Clean/gap or replace plug.
Fill fuel tank with properly
mixed fuel.
Press primer bulb fully and
slowly 10 times.
Unit starts, but engine has
low power.
Fuel filter is plugged.
Incorrect lever position.
Dirty spark arrester screen.
Dirty air filter.
Incorrect carburetor mixture
adjustment setting service dealer.
Replace the fuel filter.
Move to RUN position.
Replace spark arrester screen.
Remove, clean and reinstall
filter.
Have carburetor adjusted by an
Authorized Service Centre.
Engine sputters.
Incorrect carburetor mixture
adjustment setting.
Air filter is blocked.
Old or improperly mixed fuel.
Have carburetor adjusted by an
Authorized Service Centre.
Replace or clean the air filter.
Drain gas tank/add fresh fuel
mixture.
No power under load.
Incorrect carburetor mixture
adjustment setting.
Old or improperly mixed fuel.
Air filter is blocked.
Fouled sparking plug.
Have carburetor adjusted by an
Authorized Service Centre.
Drain gas tank /add fresh fuel
mixture.
Replace or clean the air filter.
Clean/gap or replace plug.
Runs erratically.
Incorrectly gapped sparking plug.
Blocked spark arrester.
Dirty air filter.
Clean/gap or replace plug.
Clean or replace spark arrester.
Clean or replace air filter.
Smokes excessively.
Incorrect carburetor mixture
adjustment setting.
Incorrect fuel mixture.
Have carburetor adjusted by an
Authorized Service Centre.
Use properly mixed fuel (40:1
mixture).
15. WARRANTY
-
This product is warranted for a 24-month period effective from the date of purchase by the first user.
-
This warranty covers all material or production flaws excluding: batteries, chargers, defective parts subject
to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits,
saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of
transportation.
-
Damage and/or defects resulting from inappropriate use also do not fall under the warranty provisions.
-
We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool.
-
Any transportation costs shall always be borne by the customer, unless agreed otherwise in writing.
-
At the same time, no claim can be made on the warranty if the damage of the device is the result of
negligent maintenance or overload.
-
Definitely excluded from the warranty is damage resulting from fluid permeation, excessive dust
penetration, intentional damage (on purpose or by gross carelessness), inappropriate usage (use for
purposes for which the device is not suitable), incompetent usage (e.g. not following the instructions given
in the manual), inexpert assembly, lightning strike, erroneus net voltage. This list is not exhaustive.
