background image

Tech Specs

POWER SPECIFICATIONS
• Maximum Output Power

• 4Ω load – 210W @ 1% THD+N, 1kHz
• 4Ω load – 255W @ 10% THD+N, 1kHz
• 8Ω load – 117W @ 1% THD+N, 1kHz

• Continuous Output Power without thermal shutdown

• @ 120VAC/60Hz – 140W
• @ 230VAC/50Hz – 130W

• Nominal Mains voltage

• 100 to 240 VAC, 50/60 Hz

• Maximum Input Power

• 400W Max

• Total Power efficiency

• Po = 200W - 78%

*Specifications above are for an ambient temperature of 25°C, signal frequency 
of 1 kHz. Higher ambient temperatures or restricted air flow will result in 
earlier actuation of thermal shutdown circuitry. 

AUDIO SPECIFICATIONS
• Speaker Outputs

• THD + N @ 1kHz, full rated power - ≤1%
• THD + N @ 1kHz, 10V out, 4Ω load – 0.003%
• Output referenced idle noise – ≤92µV, A-weighted  
• Dynamic Range, A-weighted – 109dB 
• Bandwidth – 5 Hz to 50 kHz ± 3 dB, 20 Hz to 20kHz @ nominal power

• EQ Parameters

• Bass +/- 10 dB @ 87 Hz 
• Mi/- 10 dB @ 645 Hz
• /- 8.5 dB @ 4.4 kHz
• Pr/- 6.8 dB @ 11.6 kHz

ENVIRONMENTAL SPECIFICATIONS
• Ambient Operating Temperature – 0° to 50°C
• Relative Humidity – 85%, non-condensing
• Altitude, operating – 2000m (6500 ft.)
• Weight – 2.87 lbs.

Limited Warranty

 

Seymour Duncan offers the original purchaser a one-year limited warranty on 
both labor and materials from the day this product is purchased. We will repair or 
replace this product at our option if it fails due to faulty workmanship or materials 
during this period. Defective products can be returned to your USA dealer, 
international distributor, or sent direct to our factory postage prepaid along with 
dated proof of purchase (e.g., original store receipt) and RMA number. Call or 
email our factory for an RMA number which must be written on the outside of the 
box. We reserve the right to refuse boxes without an RMA written on the outside. 
As you might expect this warranty does not apply if you’ve modified the unit or 
treated it unkindly. We can assume no liability for any incidental or consequential 
damages which may result from the use of this product. Any warranties implied in 
fact or by law are limited to the duration of this express limited warranty.

6

Содержание POWERSTAGE 200









Отзывы: