13. CAUTION – RISK OF ELECTRIC SHOCK! DO NOT OPEN! There are no
user serviceable parts inside. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as
power supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
14. WARNING – Due to the potential for hot surfaces and high sound pressure
levels, this equipment is not suitable for use in locations where children are likely
to be present.
Compliance Statement
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment on and off, the user is
encouraged to try and correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device has been tested for and found to comply with Australia and New
Zealand AS/NZS CISPR 32.
This device has been tested for and found to comply with Japan VCCI V3. This
is a Class B product based on the standard of the VCCI Council. If this is used
near a radio or television receiver in a domestic environment, it may cause radio
interference. Install and use the equipment according to the instruction manual.
This device been tested and found to comply with Industry Canada ICES-003 Issue
6:2016. This device complies with CAN ICES-3B/NMB-3B.
This device has been tested and found to comply with Europe’s EMC Directive
2014/30/EU. The standards applied were EN 55032 and EN 55035.
This device has been tested and found to comply with product safety directive EN
62368-1 for Audio/Video, information and communication technology equipment.
EU, AS/NZ and Japan deviations have been included in testing.
Note: Any changes or modifications to this equipment not expressly approved by
Seymour Duncan could void the user’s authority to operate this equipment.
Recycling Information
This symbol indicates this product is classified as Waste Electrical and Electronic
Equipment (WEEE) in the European Union and should not be discarded with
household waste. Other territories may vary.
Before Using Your Amplifier
VERIFY YOUR AC CIRCUIT VOLTAGE AND CAPACITY: This amplifier is designed
to accommodate line voltages from 100 to 240VAC, 50/60Hz. Connection to
voltages outside this range my cause erratic operation or result in irreparable
damage to the unit. The warranty does not cover damage caused by connection
to voltages below 100VC or above 240VAC. There are no user serviceable parts
inside the chassis. Do not attempt to open the product or service it yourself.
Under maximum load conditions this amplifier may require heavy current draw.
To ensure proper performance and avoid potential safety hazards, connect only to
circuits that can provide a minimum of 15 amps of current. Avoid connecting to the
same circuit as other high-current consumers such as heating devices, microwave
ovens and high-wattage lighting as this may cause circuit breakers or fuses to
blow. Avoid connecting any audio equipment to the same circuit as equipment
2
Содержание POWERSTAGE 200
Страница 1: ...POWERSTAGE 200 User Manual ...
