Dumor Aerocard-Strike, Руководство пользователя

Страница: 16 / 48

Geelseweg, 80 | 2250 | Olen | BELGIUM | Tel. +32 (0) 14 25 92 83 | henry.dumor@hotmail.com | www.dumor.be
16
USE OF THE BAR CODE
The bar code doesn’t set up the job from scratch
The bar code will cause a memorized job number to be recalled and the nr of sheets to be fed will be input
The way to program a bar code is indicated in the attached diagram
You need to have the program in your printing software to be able to print the bar code from the raw data
Source:
If you don’t already have a code 39 barcode generator in your pc here is a source:
a typical conversion program is on
http://www.barcodetrader.com/bct_scan_barcode.asp
Use the font called
code39.ttf
(there are many other codes but they are not supported )
You download the Font from the site and save it
Structure of the raw readable data
Star then 5 integers then star
eg:
*12345*
The first 3 digits are the job nr as per the machines loaded memory
Jobs 1-64 are factory installed in the factory program file
Jobs 165 - 228 are user programmable and saved in the user program file
Size of the printed barcode (see above)
Wide bar 1 mm x 3 pcs
Narrow bar 0.5 mm x 6 pcs ( black and/ or white )
Height 6,5 mm approx
String width 45 mm
X from edge 3 - 15 mm
Y from edge 140- 144 mm as from the last bar