background image

2

www.factorybuysdirect.com

200234-01A

TABLE OF CONTENTS

Safety ........................................................ 3

Qualified Installing Agency

 ........................ 4

Specifications

 ............................................ 5

Product Features

 ....................................... 5

Product Identification

 ................................. 5

Local Codes

............................................... 6

Unpacking

.................................................. 6

Water Vapor: A By-Product Of

 

      Unvented Room Heaters

 ..................... 6

Air For Combustion and Ventilation

 ........... 7

Installation

 ................................................. 9

Operation

 ................................................. 19

Inspecting Burners

................................... 23

Care And Maintenance

 ............................ 24

Troubleshooting

 ....................................... 25

Replacement Parts

 .................................. 29

Accessories

 ............................................. 29

Service Hints

 ........................................... 29

Technical Service

..................................... 29

Parts

 ........................................................ 30

Warranty

 .................................................. 32

INSTALLER: Leave this manual with the appliance.

CONSUMER: Retain this manual for future reference.

This is an unvented gas-fired heater. It uses air (oxygen) 

from the room in which it is installed. Provisions for ad-

equate combustion and ventilation air must be provided. 

Refer to Air For Combustion and Ventilation section on 

page 7 of this manual.

 

WARNING:  Improper  installation,  adjustment,  al-

teration,  service  or  maintenance  can  cause  injury  or 

property damage. Refer to this manual for correct in-

stallation and operational procedures. For assistance 

or additional information consult a qualified installer, 

service agency or the gas supplier.
This appliance may be installed in an aftermarket,* per-

manently located, manufactured (mobile) home, where 

not prohibited by local codes.
This appliance is only for use with propane or natural 

gas. Field conversion by any other means including the 

use of a kit is not permitted.

* Aftermarket: Completion of sale, not for purpose of resale, from the manufacturer.

SAVE THIS BOOK

PATENT INFORMATION

This product may be covered by one or more of the following United States patents: 

8,915,239   8,851,065   8,764,436   8,757,202   8,757,139   8,752,541   8,568,136   

8,545,216   8,517,718   8,516,878   8,506,290   8,465,277   8,317,511   8,297,968   

8,281,781   8,241,034   8,235,708   8,152,515   8,011,920   7,967,006   7,967,007   

7,654,820   7,730,765   7,677,236   7,607,426   7,434,447

Содержание PFS FDLR18-1

































Отзывы: