Dulce systems PRO DSqp, Инструкция по установке и эксплуатации, Страница: 41 / 44

PRO DSqp Installation and User’s Manual
Remove the final 2
screws needed to
remove the downed
drive.
Once you have the downed drive removed, insert the new drive and secure it
with the 2 screws you just removed before sliding the other half of the Disk
Module (Quad Pack) back in place.
When you have the other half of the Disk Module (Quad Pack) in place over the 4
disk drives secure it with the 16 screws you removed. Do this while the handle of
the Disk Module (Quad Pack) is on top. This will make it easier to line the
screws up.
Next is to re-install the original 4 screws you removed.
Re-install these 4
screws last.
Now that the Disk Module (Quad Pack) has been put back together with the new
disk drive installed. With the power off install the Disk Module (Pack) back into
the Pro DSqp chassis. Power on the system
In a redundant RAID mode, rebuild will start automatically after replacement of a
defective disk drive. You can monitor the process through the GUI under the
Raid Set Hierarchy.
Page 41