Dulce systems PRO DSqp, Инструкция по установке и эксплуатации, Страница: 14 / 44

PRO DSqp Installation and User’s Manual
4.2.1. Switch Settings (HBE usage only)
Configuration switch settings are needed when using the HBE, if you are using
the ExpressCard, this step can be skipped.
Determine the correct switch settings for PCI-e speed and cable length, set both
the HBE and PRO DSqp to the same configuration.
The HBE Card and the PRO DSqp enclosure can operate at 1, 4 or 8 lane speed
configurations. The maximum speed will be determined by the capability and
selection of the computer’s PCI-e slot. The HBE Card and the PRO DSqp must
be configured to match the speed of the computer PCI-e slot.
PCI-e Lane Setting
Switch 8 and 9 needs to be set to match the slot speed of the
computer. If you are unsure, the 4 lane setting is a good place to
start.
PCI-e lane speed selection
9 8 8 9
8 Lanes =
ÈÈ ÇÇ
4 Lanes =
ÈÇ ÈÇ
1 Lane =
ÇÇ ÈÈ
HBE upside down
HBE upright Back of PRO DSqp
Set both
PRO Q & HBE
Page 14