8
Installation and Operation of: Drop-In Waterless Well
INSTALLATION
Device may cause injuries due to improper installation!
Before installation, check the data of the local power grid with the technical specifications of the unit (see
nameplate). Connect the device only if they match! Follow the safety instructions!
• The unit must be installed by a qualified technician.
• The unit must be secured in accordance with local electrical codes.
Risk of electrocution!
Step 1
Set unit in desired place and level.
NOTE: Adjustment can be made by
turning the legs using adjustable pliers.
Step 5
Locate controls to body of unit. See Specification
page for cut out size.
• The device may only be operated when connected to a properly installed grounded socket.
• Make sure that the cable does not come into contact with heat sources or sharp edges.
• Do not use this device if it is not working properly or is damaged.
• Do not use any accessories and spare parts which are not recommended by the manufacturer. These
could pose a hazard to the user or cause damage to the device and cause personal injury, and also void
the warranty.
• Do not move the device during operation and do not tip it over.
• Never heat food or liquids in sealed containers or bottles. This builds up a pressure which can cause the
container or bottle to explode.
• The unit must not be used as a storage area. Accidental activation or residual heat can cause objects left
there to melt or burn .
• Do not place food directly in the unit. All foods should always be placed in appropriate food pans.
Hot surface! During operation, some parts of the device
become very hot. To avoid burns, do not touch hot parts.
CAUTION
Step 2
If needed cutout top to size indicated on
specification sheet page.
Step 4
Drop unit into place and silcon edges.
Step 6
Connect unit to control.
Step 7
Turn power see operation instructions.
OPERATION
Step 3
Add tape under flanges of unit.