Duke WW-1 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 12

Duke WW-1 Скачать руководство пользователя страница 12

Installation and Operation of: Drop-In Waterless Well

Duke Manufacturing Co.

2305 N. Broadway

St. Louis, MO 63102

Phone: 314-231-1130

Toll Free: 1-800-735-3853

Fax: 314-231-5074

www.dukemfg.com

CLEANING

•  Before cleaning the unit, switch it off with the button.
•  Leave the unit to cool.
•  Remove liner and clean with warm soapy water.
•  Finally, wipe the unit down with warm soapy water.
•  All housing parts are made of stainless steel and can be cared for and treated with commercially

available stainless steel cleaning products.

• Do not use abrasives, steel wool or similar.
• After cleaning, use a soft cloth to dry and polish the surface.

The device is not suited for direct washing with a water jet.
Therefore, do not use a pressure water jet to clean the device!

TROUBLESHOOTING

SYMPTOM

CAUSE

REMEDY

Element Does Not Heat:

Electrical power disconnected

Plug in unit

Power source circuit breaker tripped

Check circuit breaker and reset

Corroded or loose connections

Check and tighten all connections

«
...
10
11
12

Содержание WW-1













Отзывы:

Нет отзывов