Call Button Operations
Call-In Priorities
Each speaker in a room can be equipped with up to three call-in switches. Each call-in
switch is programmed with a priority level. Priority 1 is the highest, 6 is the lowest, and 7
is used to cancel the call. By default, call-in switch 1 is programmed as a normal call (pri-
ority 5), call-in switch 2 is programmed as emergency 2 (priority 2), and call-in switch 3
is programmed as call cancel (priority 7). The priorities are listed below.
1. Emergency 1 (E1)
2. Emergency 2 (E2)
3. Emergency 3 (E3)
4. High Priority (HP)
5. Normal Priority (NP)
6. Low Priority (LP)
7. Cancel
Placing a Call-In
Placing a Normal Call-In
Press and release the CALL button on a non-emergency priority call-in switch.
Placing an Emergency Call-In
Press and release the CALL button on a designated emergency call-in switch.
—OR—
Rapidly press and release the CALL button twice on a non-emergency priority call-in
switch (this must enabled by System programming).
Upgrading a Normal Call-In to Emergency
Press and release the CALL button on a designated emergency call-in switch associated
with the call-in switch that originated the normal call-in.
—OR—
Rapidly press and release the CALL button twice on the same normal call-in switch that
originated the call (this must enabled by System programming).
SCR+ Telephone Operation Manual
73
Section
5
Содержание SCR+
