Using the System priority defaults as an example, if call-in switch 1 is pressed, an ATEL
receiving the call-in would display the calling room number and the call-in queue position.
All phones (ATELs, STELs, DTMF telephones, or CTELs) in the call-in destination
group for that call-in switch annunciate the call using a constant triple burst ring until
answered.
Again using the System priority defaults, pressing call switch 2 would yield the same re-
sults as described for call-in 1 switch above. All emergency call-ins (priorities 1 through
3) create a quintuple burst ring with a cadence of 1.5 seconds on and 18.5 seconds off.
The call-in tone for priorities 4 through 6 is a triple burst ring with a cadence of 1.5 sec-
onds on and 18.5 seconds off.
Auto Answering a Call-In
In order to auto-answer a loudspeaker call-in, the extension’s intercom off-hook answer
class of service attribute must be enabled (default is disabled). If this attribute is not
enabled, see
Manually Answering a Call-In
on page 28. For both manually and automati-
cally answering call-ins, the extension must have the intercom access class of service
attribute enabled.
If more than one call is in the queue, the calls are automatically sorted by priority, fol-
lowed by the order in which they are received.
1.
TEL: Lift the handset or press SPKR PHONE.
STEL, DTMF telephone, or CTEL: Lift the handset.
2.
ATEL: Speak clearly into the handset or press the TALK key and speak clearly into
the microphone. When the handset is used, your voice automatically triggers the talk
mode to the calling room.
STEL, DTMF telephone, or CTEL: Speak clearly into the handset.
3.
ATEL: Stop speaking into the handset or release the TALK key and listen for the
reply from the calling room.
STEL, DTMF telephone, or CTEL: Stop speaking into the handset and listen for the
reply from the calling room.
4.
ATEL ONLY (handset): Pressing the MUTE button (F6 factory default) will
alternately mute and unmute both the talk and listen operation of the handset.
5.
ATEL ONLY (push to talk): Press the VOL up/down key to adjust the listen volume.
Note:
The MUTE function is not available in this mode of operation.
continued
SCR+ Telephone Operation Manual
27
Answering Speaker Station Calls
Содержание SCR+
