Dukane 8970WUSS Скачать руководство пользователя страница 11

Страница: 11 / 136

QM00481-1

Setting up

Arrangement (continued)

WARNING

(continued on next page)

►

Install the projector where you can access the power

outlet easily.

If an abnormality should occur, unplug the projector immediately.

Otherwise it could cause a ﬁre or electric shock.

►

Do not subject the projector to unstable conditions.

If the projector falls

or topples over, it could result in injury or damage to the projector and the

surrounding things. Using a damaged projector could result in a ﬁre and an

electric shock.

• Do not place the projector in unstable places, such as an inclined surface,

places subject to vibration, on top of a wobbly table or cart, or a surface that is

smaller than the projector.

• Do not put the projector on its side, front or rear position.

• Do not attach nor place anything on the projector unless otherwise speciﬁed in

the manual.

• Do not use any mounting accessories except the accessories speciﬁed by the

manufacturer. Read and keep the manuals of the accessories used.

• For special installation such as ceiling mounting, be sure to consult your dealer

beforehand.

• You can install the projector for any direction with speciﬁed mounting

accessories. Consult with your dealer about such a special installation.

• Remove all the attachments including the power cord and cables, from the

projector when carrying the projector.

►

Do not install the projector near thermally conductive or ﬂammable

things.

Such things when heated by the projector could result in a ﬁre and burns.

• Do not place the projector on a metal stand.

►

Do not place the projector where any oils, such as cooking or machine

oil, are used.

Oil may harm the projector, resulting in malfunction, or falling from

the mounted position. Do not use adhesive such as threadlocker, lubricant and

so on.

►

Do not place the projector in a place where it may get wet.

Getting the

projector wet or inserting liquid into the projector could cause a ﬁre and an

electric shock, and damage the projector.

• Do not place the projector near water, such as in a bathroom, kitchen, or

poolside.

• Do not place the projector outdoors or by the window.

• Do not place anything containing liquid near the projector.

►

Do not block the intake vents and exhaust vents of the projector.

If the

intake vents and exhaust vents of the projector are blocked, the accumulated

inside heat may cause ﬁre.

Содержание 8970WUSS









































































































































Результаты поиска

Содержание 8970WUSS

Отзывы:

Похожие инструкции для 8970WUSS

Бренды по названию

Популярные бренды

Dukane 8970WUSS, Руководство пользователя

Результаты поиска

Содержание 8970WUSS

Отзывы:

Похожие инструкции для 8970WUSS

Бренды по названию

Популярные бренды