background image

31

 PICTURE menu 

 PICTURE menu 

 PICTURE menu 

 From the PICTURE menu, items shown in the table 
below can be performed. 
  Select an item using the 

/

 cursor buttons on the 

projector or remote control, and press the 

 cursor 

button on the projector or remote control, or the 
ENTER

ENTER button on the remote control to execute the 
item. Then perform it according to the following table. 

 Item  

Description 

 BRIGHTNESS 

Using the 

/

 buttons adjusts the brightness.

Dark  

 

 Light

 CONTRAST 

Using the 

/

 buttons adjusts the contrast.

Weak  

 

 Strong

 GAMMA 

Using the 

/

 buttons switches the gamma mode.

 To adjust CUSTOM 

Selecting a mode whose name includes CUSTOM and then 

pressing the 

 button or the ENTER

ENTER button displays a dialog to aid 

you in adjusting the mode.

This function is useful when you want to 

change the brightness of particular tones.
Choose an item using the 

/

 buttons, and 

adjust the level using the 

/

 buttons.

You can display a test pattern for checking the effect of your 

adjustment by pressing the ENTER 

ENTER or VIDEO 

VIDEO button.

Each time you press the ENTER 

ENTER or VIDEO

VIDEO button, 

the pattern changes as below.
  No pattern  

 

 Gray scale of 9 steps 

    

 Ramp  

 

 Gray scale of 15 steps

The eight equalizing bars correspond to eight tone levels of the test 
pattern (Gray scale of 9 steps) except the darkest in the left end. 
If you want to adjust the 2nd tone from left end on the test pattern, 
use the equalizing adjustment bar “1”. The darkest tone at the left 
end of the test pattern cannot be controlled with any of equalizing 
adjustment bar.
• When this function is performed, lines or 
other distortions may appear.

 (continued on next page) 

1 DEFAULT 

 1 CUSTOM 

 2 DEFAULT 

 2 CUSTOM 

 3 DEFAULT

6 CUSTOM                                                                                          3 CUSTOM

6 DEFAULT 

 5 CUSTOM 

 5 DEFAULT 

 4 CUSTOM 

 4 DEFAULT

Содержание 8952P















































































Отзывы: