48
3.1.5 Mail Settings
Displays and configures e-mail addressing
settings.
Item
Description
Send Mail
Click the
[Enable]
check box to use the e-mail function.
Configure the conditions for sending e-mail under the
Alert
Settings
.
SMTP Server Address
Configures the address of the mail server in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the
Network
Settings
. The maximum length of host or domain name is up
to 255 characters.
Sender E-mail address
Configures the sender e-mail address.
The length of the sender e-mail address can be up to 255
alphanumeric characters.
Recipient E-mail address
Configures the e-mail address of up to five recipients. You
can also specify the
[to]
or
[cc]
for each address. The
length of the recipient e-mail address can be up to 255
alphanumeric characters.
Send Test Mail
Sends a test e-mail to the set address.
Click the
[Apply]
button to save the settings.
Mail settings are initialized when clicking the
[Reset]
button.
• You can confirm whether the mail settings work correctly by using the
[Send Test Mail]
button. Enable Send Mail setting before clicking the
[Send
Test Mail]
.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
NOTE
3. Web Control
3.1 Projector Web Control (continued)
