44
3.1 Projector Web Control - Network Settings (continued)
3. Web Control
Item
Description
Wireless Setup
Configures the wireless LAN settings.
Infrastructure
settings
Configures Infrastructure mode.
IP Configuration
Configures network settings.
DHCP ON
Enables DHCP.
DHCP OFF
Disables DHCP.
IP Address
Configures the IP address when DHCP is disabled.
Subnet
Mask
Configures the subnet mask when DHCP is disabled.
Default
Gateway
Configures the default gateway when DHCP is disabled.
DNS Server
Address
Configures the DNS server address.
SSID
Select an SSID from the list.
If you require to set your unique SSID, select
[Custom]
, then
set your own SSID following the rules below.
The maximum number of input characters is 32.
Only alphabets, numbers and the following symbols can be
used.
!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ and space.
Encryption
Select data encryption method.
WEP Key
Input the WEP key.
Either ASCII characters or hexadecimal numbers can be
used during WEP key input. However, you cannot use a
combination of both. The length of the key is defined as
follows according to the WEP and character formats.
Encryption
ASCII characters
HEX numbers
WEP 64bit
5 characters
10 characters
WEP 128bit
13 characters
26 characters
WPA Passphrase
Input WPA Passphrase.
Available number of input characters is 8 to 63. Only
alphabets, numbers and the following symbols can be used.
!"#$%&'()*+,-./:;<=>?@ [\]^_`{|}~ and space
(continued on next page)
