19
Power on/off
1.
Make sure that the power cord is firmly
and correctly connected to the projector
and the outlet.
Turning on the power
2.
Make sure that the
POWER
indicator is
steady orange (
119
).
3.
Confirm that there is nothing that the lens
door hits while opening. Press
STANDBY/
ON
button on the projector or the
remote control. The lens door opens, the
projection lamp lights up, and the
POWER
indicator begins to blink green. When the
power is completely on, the indicator will
stop blinking and light in steady green
(
119
).
Power on/off
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT
SEARCH BLANK
MUTE
MY BUTTON
POSITION
ESC
MENU
RESET
COMPUTER
MY SOURCE/
AUTO
MAGNIFY
PAGE
DOWN
ON
OFF
FREEZE
UP
ー
+
VOLUME
1
2
ENTER
FOCUS
-
+
D-ZOOM
-
+
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT
SEARCH BLANK
MUTE
MY BUTTON
POSITION
1
2
ESC
ENTER
MENU
RESET
COMPUTER
MY SOURCE/
AUTO
MAGNIFY
PAGE
UP
VOLUME
DOWN
ON
OFF
㧗
FREEZE
STANDBY/ON
button
POWER
indicator
(continued on next page)
To display the picture, select an input signal according to the section
Selecting an
input signal
(
22
).
The INITIAL SETTING Menu will be displayed by factory default upon startup.
Once the INITIAL SETTING Menu is set, it will not appear until FACTORY RESET
(
69
) is executed. If you wish to change the settings, refer to the LANGUAGE
(
52
) and ALTITUDE (
62
) menu.
(1) LANGUAGE: Use the ▲/▼/◄/►
buttons to select the desired language
and press the
ENTER
button of the
remote control or the
INPUT
button of
the projector to execute.
(2) ALTITUDE: Use the ▲/▼ buttons to
select NORMAL for altitude below
1600 m (5250 feet), otherwise select
HIGH and press the
ENTER
button of
the remote control or the
INPUT
button
of the projector to execute.