1.3
Noise level Lc
Workstation related emmission according to DIN 45635-48-A-1-Kl 2
Number of stitches:
2.140 min-1
stitch length:
5,0 mm
alternating sewing feed stroke: 5,6 mm
Sewing material:
Upholstery vlies with upper cloth 674g/m
2
Lc =
83 dB (A)
1.4
Subclasses
550-12-23
Configured work station with pneumatic pressure foot stroke.
550-12-24
Configured work station with pneumatic pressure foot stroke and
additional pneumatic edge cutter.
550-12-26
Configured work station with pneumatic pressure foot stroke,
pneumatic edge cutter, tape feed and tape scissors for the partial
undersewing of 3-mm-wide reinforcing tape
1.5
Technical Data
Needle system:
933
Maximum number of stitches:
3000 r/min
Maximum stitch length:
Top feed 8 mm
Drop feed normal stitch 5 - 2.5 mm
Drop feed differential 8 mm
Maximum pressure foot lift:
2-7 mm
Clearance under the pressure feet:
When sewing:
10 mm
When raised:
15 mm (max. 17 mm)
Cutting clearance (only -12-24/26): 4,5 mm
Knife stroke height (only -12-24/26): 8 mm (convertible to 6 mm)
Maximum thread thickness:
20/3 Nm
Operating pressure:
6 +/- 0.5 bar
Line pressure:
7-10 bar
Air consumption per work cycle:
0,1 NL
Through-put area:
280 x 108 mm
1.6
Optional Equipment
N900 040026
Edge stop for 550-12-23
N900 003471
Upper tape tensioner with Roller Holder for 550-12-23/-24
N900 003511
Lower tape tensioner with Roller Holder for 550-12-23/-24
0196 104008
Rear sole of the intermittent feed foot, PTFE covered.
For better glide characteristics when working leather and similar.
0797 003031
The workstation is supplied without a compressed-air connection hose,
coupler plug & socket and hose socket. A 9-mm connection hose 5 m
long with hose socket, clamp, plug and socket can be ordered if
required. Order no.: 0797 003031.
NB:
One of the tape tensioners is supplied with the workstation.
6
