30
Operation
Time interval
Removal of the needle plate and its cleaning out. Cleaning out of the wheel feeder, shuttle and their
surrounding space. Removal of the residues of material and threads from the feeder wheel.
1 day
Checking the oil level in oil reservoirs.
1 month
Checking the shuttle wear. Checking the function of the safety clutch against the shuttle overload.
6 months
Checking the V-belt and the indented belts, checking the friction wheels of the drive convertion unit.
1 year
11. Setting the machine according to the sewing category
11.1 Introduction
This sewing machine enables sewing operations within an extent from 1. 2 to 2.4 mm in sewing category light and medium sewing. To the sewing
category must be in accordance with the given machine setting which includes also the replacement of some components, such as the needle, the
needle plate insert, the spring of the main tensioner, the top roller. For this reason, the setting of the machine is divided into 2 categories:
1 ... light sewing
2 ... medium sewing
In the factory, where this machine has been manufactured, it has been set up with respect to the standard parameters of the required stitch width and
the required sewing category which is designed by the number included in the commercial designation of the machine. If the user desires changing
the given setting to another sewing category or stitch width of needles, this operation should be performed by a specialized mechanician.
Caution!
When changing the sewing category, loosen the tensing up of the fixed trimming knife.
Otherwise there is a danger of destruction of the rotating knife.
The standard parameters of sewing are described in the following paragraph. The actual parameters of sewing inside the given sewing category may
be different, which means that the machine operative must adapt respectively the setting of the machine, e.g. the tension of the needle thread.
10.
Maintenance
Caution! Danger of injury!
The maintenance operations should be performed only with the machine switched off and with the motor stopped!
In the following table there are given the operations which should be performed and the respective time intervals between the individual operations.
