17. Cleaning and storage
All materials for the harness were carefully selected, keeping their quality and durability in mind. With help of your care they will keep
your harness in good condition for a long time. The harness is best cleaned with a wet sponge, possibly a bit of soap. Do not use
neither detergents nor solvents. If there is a lot of mud, first use a brush before wet cleaning.
In case of completely soaked harness (e.g. after water landing) dry it in a well aired place, away from direct sun operation.
Soaked back protector must be taken out of the harness and dried with its zip opened. If this will not be enough, remove the airfoam
and dry it separately.
Soaked rescue chute has to be always completely removed from the harness, dried and packed again by a licensed person.
You can store the harness in the backpack or best keep it loose, in a well ventilated room, away from the sun. For longer periods of
inactivity we recommend storing the harness out of the backpack. Unfortunately some discoloration of individual harness parts is
unavoidable over time and this is yet another reason for not exposing it to the sun more than necessary. Before packing the harness
remove the stiffener from the upper area of the back pocket. Open the cockpit and put the instrument panel inside.
30
Содержание Funky 2018
