Ducati PANIGALE, Руководство пользователя

Страница: 48 / 240

Turn indicators
The instrument panel manages the turn indicators in
manual or automatic mode according to the setting
of the “Turn indicators” function present within the
SETTING MENU (see “SETTING MENU - Turn
indicators”). The turn indicators are activated using
the corresponding position of button (3, Fig 20).
Manual switch-off: after activating one of the two
turn indicators, the user can deactivate them using
button (3, Fig 20).
Automatic switch-off: the turn indicators switch off
automatically after the turn, as calculated based on
vehicle speed, lean angle and in general according to
the analysis of vehicle dynamic conditions.
If the turn indicator switch is again operated, while
turn indicator is still on, automatic switch-off feature
is re-initialised.
Attention
The automatic deactivation systems are assist
systems helping the rider control the turn indicators
in the most comfortable and easy way. Such systems
have been designed to work in most riding
manoeuvres, nonetheless the rider must pay
attention to the turn indicator operation (disabling
or enabling them by hand if needed).
Hazard function (4 turn indicators)
The Hazard function turns all four turn indicators on
at the same time to signal an emergency condition.
This function is activated by pressing button
(8, Fig 20).
When the Hazard function is active, all four turn
indicators blink at the same time as well as the
warning lights on the instrument panel.
If the Hazard function was activated upon key-on,
the same function will remain active upon key-off: it
will be automatically disabled after 120 minutes.
In Key-Off it is not possible to activate the Hazard
function.
Note
If key is turned on while the "Hazard" function
is active, the function remains active.
Note
If there is a sudden interruption in the battery
while the function is active, the instrument panel will
disable the function when the voltage is restored.
47