Ducati PANIGALE, Руководство пользователя

Страница: 46 / 240

DRL in "Auto" mode – only for version with
DRL lights
If the DRL was set to "Auto" via the "DRL" function
within the SETTING MENU (see “SETTING MENU -
DRL”), the instrument panel automatically manages
the DRL and the low beam according to detected
ambient light:
●
if the instrument panel detects good light
conditions (day) the DRL is turned on and the
low beam is turned off;
●
if the instrument panel detects poor light
conditions (night) the DRL is turned off and the
low beam is turned on.
When the DRL is set to AUTO mode, the display
shows the warning light indicated in the figure.
If the DRL was set to "Auto" mode, press button
(9, Fig 20) to disable that mode and set manual light
management. Press again button (9, Fig 20) to re-
enable DRL but with control strategy set to
"Manual".
In this case, upon next Key-On, DRL will be again set
to "Auto" mode.
Attention
Using the DRL light in "Auto" mode in case of
poor light conditions, especially in case of fog or
clouds, could impair safety. In this case Ducati
recommends to manually activate the low beam.
DQS
EBC
1
N
0
2
3
4
5
6
7
8
9
11
10
12
12:34
PM
DTC
DDA
OFF
3
3
U/D
ABS 1
DWC
RPM X 1000
km/h
TOT
120
°C
SPORT Gear
1
km
260
A
Fig 22
45