Ducati Multistrada MTS 1200S D-Air Скачать руководство пользователя страница 74

Страница: 74 / 443

Engine rpm indication (RPM)

The instrument panel receives the engine rpm

information and displays it on the relevant bargraph

(in TRACK, FULL and OFF ROAD display modes only).

The information is displayed by the bargraph filling

from the left to the right according to the engine rpm

and with the enlargement of the numerical digit of the

relevant miles (e.g., if the RPM value is "8000" or

higher, number "8" is displayed bigger).

The range between 8500 and 10500 rpm (pre-

warning area) is displayed in orange both for the

bargraph filling and for the indication of value "10"

(orange area).

The range between 10500 and 11000 rpm (warning

area) is displayed in red both for the bargraph filling

and for the indication of value "11" (red area).

Содержание Multistrada MTS 1200S D-Air




























































































































































































































































































































































































































































Результаты поиска

Содержание Multistrada MTS 1200S D-Air

Отзывы:

Ducati Multistrada MTS 1200S D-Air, Руководство пользователя, Страница: 74 / 443

Результаты поиска

Содержание Multistrada MTS 1200S D-Air

Отзывы: