Ducati Multistrada MTS 1200S D-Air Скачать руководство пользователя страница 428

Страница: 428 / 443

Performance data

Maximum speed in any gear should be reached only

after a correct running-in period with the motorcycle

properly serviced at the recommended intervals.

Important

Failure to follow these instructions releases

Ducati Motor Holding S.p.A. from any liability

whatsoever for any engine damage or shorter engine

life.

Spark plugs

Make: NGK.

Type: MAR10A-J.

Fuel system

BOSCH electronic injection.

Type of throttle body: elliptical with full Ride-by-Wire

system.

Diameter of throttle body: 56 mm.

Injectors per cylinder: 1.

Firing points per injector: 10.

Fuel supply: 95-98 RON.

Warning

The motorcycle is only compatible with fuel

having a maximum content of ethanol of 10% (E10).

Using fuel with ethanol content over 10% is

forbidden. Using it could result in severe damage to

the engine and motorcycle components. Using fuel

with ethanol content over 10% will make the

warranty null and void.

Brakes

Separate-action anti-lock braking system operated by

hall-type sensors mounted to each wheel with phonic

wheel detection: ABS can be disabled.

FRONT

Semi-floating drilled twin-disc.

Braking material: stainless steel.

Carrier material: aluminium.

Disc diameter: 330 mm.

Hydraulically operated by a control lever on handlebar

right-hand side.

Brake calliper make: BREMBO, radially mounted

monobloc callipers.

Front brake type: M50 (2x30).

Friction material: TT 2182.

427

Содержание Multistrada MTS 1200S D-Air




























































































































































































































































































































































































































































Результаты поиска

Содержание Multistrada MTS 1200S D-Air

Отзывы:

Ducati Multistrada MTS 1200S D-Air, Руководство пользователя, Страница: 428 / 443

Результаты поиска

Содержание Multistrada MTS 1200S D-Air

Отзывы: