manualshive.com logo in svg

Ducati MONSTER 821, Руководство пользователя, Страница: 236 / 295

Поделиться
Скачать
Ducati MONSTER 821 Скачать руководство пользователя страница 236

Charging the battery

Warning

Have the battery removed at a Ducati Dealer or

authorised Service Centre.

To reach the battery, refer to "Removing the battery"

page 240.

Warning

The battery gives off explosive gases; never

cause sparks or allow naked flames and cigarettes

near the battery. When charging the battery, ensure

that the working area is properly ventilated.

Charge the battery in a ventilated room.

Connect the battery charger leads to the battery

terminals: the red one to the positive terminal (+), the

black one to the negative terminal (-).

Smear positive pole (+) and negative pole (-) screws

with grease.

Important

Make sure the charger is OFF when you connect

the battery to it, or you might get sparks at the battery

terminals that could ignite the gases inside the cells.

Always connect the red positive (+) terminal first.

-

+

Fig. 174

235

Содержание MONSTER 821








































































































































































































































































































Отзывы:

Нет отзывов