Ducati MONSTER 821 Скачать руководство пользователя страница 16

Страница: 16 / 295

Refuelling

Refuel outdoors with engine off.

Do not smoke or use open flames while refuelling.

Be careful not to spill fuel on engine or exhaust pipe.

Never completely fill the tank when refuelling. Fuel

should never be touching the rim of filler recess.

When refuelling, avoid breathing the fuel vapours and

prevent fuel from reaching your eyes, skin or clothes.

Warning

The motorcycle is only compatible with fuel

having a maximum content of ethanol of 10% (E10).

Using fuel with ethanol content over 10% is

forbidden. Using it could result in severe damage of

the engine and motorcycle components. Using fuel

with ethanol content over 10% will make the

warranty null and void.

Warning

In case of indisposition caused by breathing fuel

vapours for a long time, stay in the open air and

contact your doctor. In case of contact with eyes,

thoroughly flush with water; in case of contact with

skin, immediately clean with water and soap.

Warning

Fuel is highly flammable, in case of accidental

spillage of fuel on your clothes it is necessary to

change into clean clothes.

Содержание MONSTER 821








































































































































































































































































































Результаты поиска

Содержание MONSTER 821

Отзывы:

Ducati MONSTER 821, Руководство пользователя, Страница: 16 / 295

Результаты поиска

Содержание MONSTER 821

Отзывы: