57
E
Shock absorber adjusters
(fig. 50 and fig. 51)
The shock absorber has external adjusters that enable you to
adjust the suspension to suit the load on the motorcycle.
Adjuster (1), located on the left-hand side at the point at
which the top of the shock absorber is fixed to the rear
sub-frame, controls rebound damping.
Turn the adjuster (1) clockwise to increase damping, or
counter-clockwise to reduce damping.
1100
STANDARD setting from the fully closed position (clockwise):
-
unscrew the adjuster (1) by 13 clicks.
Spring preload: 18 mm.
1100S
STANDARD setting from the fully closed position (clockwise):
-
unscrew the adjuster (1) by 15 clicks.
Spring preload: 19 mm.
The two nuts (2) on the upper part of the shock absorber
serve to adjust the preload on the external spring. To
change spring preload, slacken off the upper lock nut.
Then
tighten
or
loosen
the lower nut to
increase
or
decrease
spring preload as required.
Warning
The shock absorber is filled with gas under pressure
and may cause severe damage if taken apart by unskilled
persons.
1
2
1100
fig. 50
2
1
1100S
fig. 51
Содержание MONSTER 1100
