Ducati MONSTER 1100, Руководство пользователя

Страница: 54 / 128

53
E
Seat lock and helmet holder
Opening
Insert the key in the lock and simultaneously apply downward
pressure in the area of the catch to release the pin. Pull the
seat backwards to release it from the front catches.
The helmet cable (1) is located at the rear of the compartment
under the seat (see page 40). Pass the cable through the
helmet and insert the end of the cable in the pin (2). Leave
the helmet hanging and refit the seat to hold it in place.
Warning
This device protects the helmet against theft when the
motorcycle is parked. Do not leave the helmet attached in
this way when riding the motorcycle, as it can interfere with
your movements and cause loss of control of the motorcycle.
Closing
Make sure all parts are correctly arranged and secured in the
underseat compartment. Insert the front ends of the seat
base under the U bolt in the frame, then push the rear end
of the seat until you hear the bolt in the lock click into place.
Check that the seat is firmly secured to the frame and
remove the key from the lock.
1
2
fig. 44
fig. 43