10
The charger must be used sheltered from the elements and not exposed to direct sunlight.
Do not cover the charger when functioning, as doing so will impede cooling and cause damage.
If the internal temperature of the e-wheel is above 45°C (due to exposure to sunlight or intensive use), the battery cannot be charged until
the temperature drops below this threshold.
•
Charging the battery with any device that is not the original charger supplied by DUCATI Energia, and connecting any
unauthorised electrical devices to the e-wheel circuits or its charger can result in serious material and personal damage
and cause a fire.
•
Do not use the charger or the cables if they look damaged. The voltage inside the device is dangerous when in use.
7
USING A BICYCLE WITH FREEDUCK2 WHEEL
The FreeDUCk2 wheel is designed for easy use. The bicycle on which it is mounted can be used both in pedal-assist mode or as a
traditional bike by simply keeping the e-wheel turned off.
7.1
Pedal assist mode
In this mode, the electric motor assists pedalling, so cycling is easy and relaxing.
The power supplied by the motor is proportional to the force exerted on the pedals (combined torque-speed sensor), so riding is smooth
even when going uphill and starting and stopping continuously, as is the case in city traffic.
The motor supplies up to 250 W power and a speed of 25 km/h, as per the European
standards concerning the operation of pedal assist bikes. In case of higher power demand
(such as facing a very tough climb) or travelling at speeds above 25 km/h the engine stalls.
To activate pedal assist mode, keep the power button pressed for a few seconds. A light will
flash and show the colour corresponding to the battery level (see Par. 6.3 p.8).
Once finished, remember to switch off the e-wheel by pressing the same button.
