6
Screw on the two axle nuts and position the e-wheel parallel to the frame so that the
chain has a 15-20 mm stroke at the centre.
Correct adjustment is necessary to prevent the bearings and transmission organs from
premature wear.
Check the alignment of the wheel again (adjust if needed) and tighten the nuts to a
30Nm torque using a 14mm spanner.
Once assembled, lubricate the transmission with chain grease.
•
Riding with a wheel that has not been properly installed is very dangerous. Use suitable tools in good condition for
tightening. Respect the tightening torques indicated.
