4
Model names
Voltage
Power
M-28 Downflow
AC220-240V 50/60Hz
2000W
Electrical Connection
A qualified electrician must carry out the electrical installation of this heater. The electrical
installation must comply with the current UK regulations. Any claim on the warranty will be
invalid if these requirements have not been met.
The radiator requires a 220/240V 50/60Hz power supply.
Connecting wires:
Brown: Live
Blue: Neutral
The power supply must comply with the current regulations for the power rating of the
product.
The apparatus must be connected into a fused connecting box with an appropriate sized
fuse for the heater.
We recommend that the connecting box is positioned 10cm to the right of the product.
According to regulations, the product must be connected to the power supply by means of
an all-pole circuit breaker with a contact gap of at least 3mm or by a thermal-magnetic circuit
breaker.
Location of The Heater
In bathrooms, the heater must not be sited inside the protected area.
The heater switches must not be reachable, directly or indirectly, by a person in the bath or
shower.
The heater, under no circumstances, should be installed directly below an electric power
point.
Mounting The Heater
•
Important!
Make sure that there are no electric cables or other installations (for
example water pipes) are located near the drill holes. Make sure that the heater is
fitted securely and is mounted horizontally with the air outlet facing downwards.
The product should be fitted with 2 screws, allowing a minimum of 25cm of unobstructed
space either side of the heater.
Ensure that there is a minimum of 20cm of unobstructed space above the heater.
4. INSTALLING THE DEVICE
3. SPECIFICATIONS
