Ducasa AVANT-DGi+ 1000, Инструкции по эксплуатации и монтажу

Страница: 4 / 16

4
• All repairs where required must be completed by the manufacturing company or by
special authorised staff.
• If the heater is sold without cable and plug or any other disconnecting method, the
installer must incorporate a disconnecting device taking into account the specific
regulations that apply.
• This heater has been designed and created as a fixed heating device unless it’s being
used with the optional feet and castor/pad set and must be used for this purpose only.
• If being wall mounted, the heater must be mounted using the brackets supplied with the
heater.
• Do not place the heater directly on the floor.
• Make sure that the wall where the heater is going to be mounted is suitable to bear the
heater’s weight.
• Use the correct fixing for the type of wall the heater is to be mounted onto.
• Make sure that the electrical power supply corresponds to the information indicated on
the heaters rating label.
• The heater must be levelled correctly both vertically and horizontally.
• When the heater is operational, the power cord must be totally unrolled and must not
touch the surface of the unit.
• Do not operate the heater with wet hands.
• Before undertaking any type of maintenance, ensure that the heater is disconnected
from the power supply by removing the fuse from the spur outlet.