Enter
End
Good Read Beep
*Enabel
Disabel
Good Read Vibrator
Enabel
*Disabel
The vibration configuration if barcode reading
is successfully decoded. Note:Vibration
function is only available for the scanner with
vibrator installed.
Connect Off Time
(1) Enter
Under the Bluetooth mode, when the Bluetooth connection is
established while the scanner is not working. This configuration enables
to set the duration of scanner sleep time. (
Note: Default value is 6 as
60 seconds
)
(2) Connect Off Time barcode
(3) Scan parameters from Hexadecimal /
Decimal table
(Range:0~255 = 0~42Min 30sec)
(4) OK
(5) End
Standby Time
This configuration enables the time configuration for the main power
switching off after scanner LED turned off.
(1) Enter
(2) Standby Time barcode
(3) Scan parameters from Hexadecimal /
Decimal table
(Range:0~99 = 0~99sec)
(4) OK
(5) End
Data & Time Transmission
*Enabel
Disabel
Under Bluetooth mode, user can enabled/
disable the time stamp function in front of the
barcode data.
Time Format
*hh
:
mm
:
ss
hh
:
mm
Time format configuration, in order for the time
stamp to be display in front of each barcode
data, Date and Time Transmission must be
enabled and configure the following formats:
13
14
Содержание DS-800
Страница 1: ...DS 800 BT Pocket size Wireless Scanner User s Manual...
Страница 55: ...Appendix ASCII Code Table Appendix ASCII Code Table 106 105...
Страница 56: ......